大功率直流无刷电机控制器220VAC380VAC1kw-150kw

AMF53 Series For BLDC Controller

一、Features产品特性

1. Optimal design for BLDC motor control.针对BLDC电机驱动控制进行的优化设计  

2. Space vector control method FOC is adopted.采用空间矢量控制方式FOC

3. Voltage monitoring on 3 motor phases, bus, and power supply.3个电机相、母线和电源的电压监控

4. Current control loop.电流控制回路

5. It has forward and reverse control and braking functions.具备正反转控制、刹车功能

6. It has stepless speed regulation function.具备无极调速功能

7. Aluminum heat dissipation shell design, with excellent heat dissipation performance.增加风扇，具有的散热性能 l

8. LCD display screen is added to facilitate the use of instruments to observe the system operation status and fault indication.增加 LCD 显示屏，方便使用仪表观察系统运行状态及故障指示 l

9. Hardware over current protection.硬件过流保护

10. Hardware over voltage protection.硬件过压保护

11. Thermal protection: current cut back, warning and shutdown on high temperature.热保护：电流切断，高温警告和停机

二、Electrical parameters电气参数

三、Product selection产品选型

四、Size外观尺寸

Mounting aperture 安装孔径一6

Unit单位MM

五、Electrical interface电气接口

Note注：Do not touch the weak current and strong current to avoid short circuit burning the circuit board.弱电和强电请勿接触，避免短路烧坏电路板。

六、Control mode switching控制方式切换

Factory default value of driver control mode: RS485 bus controls start、stop and speed.

If you need to change to the panel control on the driver, you can set the panel key and modify the value of parameter attribute f0-02 to 0 and the value of parameter attribute f0-03 to 4.

If you need to change back to RS485 bus control, set the value of parameter f0-02 to 2 and the value of parameter f0-03 to 9.

Multiple parameters can be configured through RS485 bus. For example, start and stop, adjustment of running speed, reading of current state of drive, etc.

驱动器控制方式出厂默认值：RS485总线